Wednesday, March 29, 2017

Which type of multiple-cell box girder is better, cells connected by top flanges or cells connected both by top and bottom flanges?

When the depth of a box girder bridge exceeds 1/6 or 1/5 of the bridge width, it is recommended to be designed as a single cell box girder bridge. However, if the bridge depth is smaller than 1/6 of the bridge width, then a twin-cell or multiple cell is a better choice. However, even for wider bridges with small depths, the number of cells should be minimized
because there is not much improvement in transverse load distribution when the number of cells of box girder is increased to three or more. For multiple-cell box girders, there are generally two arrangements. The first one is that independent cells are connected by their top flanges only while the other one is that the cells are connected both at the top and bottom flanges. From the structural point of view, it is recommended to adopt the second arrangement. For the case of cells connected by top flanges only, their flanges are heavily stressed in the transverse direction owing to flexure which cannot be effectively distributed across the cross section.


Ref: Mastering Different Fields of Civil Engineering Works (VC-Q-A-Method) by Vincent T. H. CHU.


  1. APTRON Solutions in Noida is the ideal place to embark on your journey to becoming a skilled STAAD.Pro professional. Our holistic training approach, experienced instructors, and industry-focused curriculum set us apart as a leading STAAD. Pro Training Institute in Noida. Don't miss this opportunity to advance your career in structural engineering. Enroll today and take the first step toward a brighter future in the field. Your success starts here at APTRON Solutions.

  2. The versatility of lithium batteries allows for custom configurations to meet specific power requirements. Victron